Menu
  • slide1
  • slide2
  • Heating Module Projects 1
  • slide3
  • Hydro Heating Van Toronto DEC 2017
  • slide4
  • slide5
  • To Be A Super Installer

    Supporting Your Success

  • Remote Monitoring and Control

    DL2, DL3 and Vbus.net--System Is Near At Hand

  • Hydronic Heating Modules

    Easy Mounting, Easy Installation, High-Quality Performance

  • Control Logic and Diagram

    Customizing Your Control System-We Are Your Tailor

  • Hydronic Heating Modules

    Ideal for Tight Spaces

  • Control Panel

    CSA Inspection Approval

  • Control Panel

    Standard, Professional and Reliable

This is a test gallery image can go here, with example.

manopfilinj7062.jpg Male = 1/2’’, 15 mm hose connection.  Additional drain valve.  Attainable pressure until approx. 4 bar, length: 225 mm

[Item # 7062] 

manopfilinj7061.jpg Male = 1/2’’, 15 mm hose connection.  Attainable pressure until approx. 4 bar, length: 175 mm

[Item # 7061] 

flushdrainkit.jpgt-piece with counter nut, self-sealing with drain valve, for expanding the solar system with a flush and drain connection, assembly at the lowest point (drain unit).

1 piece DN 20 - 3/4’’ [Item # 31611NA] 

thermowells.jpgFor the assembly of the temperature sensors inside the storage, collector etc.

Selfsealing with o-ring, brass blank, for sensor Ø 5.5 mm, depth = 30 mm [Item # 566001]

standard, chromed brass, for sensor Ø 6 mm, depth = 60 mm [Item # 566002]

standard, chromed brass, for sensor Ø 6 mm, depth = 100 mm [Item # 566003]

standard, chromed brass, for sensor Ø 6 mm, depth = 150 mm [Item # 566004]

con4therm.jpg For thermowell with 1/2’’ male, up to 60 mm length 1’’ union nut with gasket, 3/4’’ female, bushing 1/2’’

[Item # 5660] 

main4solar.jpg With solar fluid fine filter (250 μ) as protection of the pump, the flow check valve(s) and the flow meter against dirt particles (e. g. solder residues and scales particles).

For assembly inside thesolar flow line, above the ball valve.
Completely closable for servicing so that only a small amount of solar fluid has to be refi lled.

Connection to the solar station with self sealing screw connection 3/4’’, outlet 3/4’’ female.

[Item # 56701]

  •  Start 
  •  Prev 
  •  1  2 
  •  Next 
  •  End 

Page 1 of 2

Go to top