• slide1
  • slide2
  • slide3
  • Heating Module Projects 1
  • slide4
  • slide5
  • To Be A Super Installer

    Supporting Your Success

  • Remote Monitoring and Control

    DL2, DL3 and Vbus.net--System Is Near At Hand

  • Control Logic and Diagram

    Customizing Your Control System-We Are Your Tailor

  • Hydronic Heating Modules

  • Control Panel

    CSA Inspection Approval

  • Control Panel

    Standard, Professional and Reliable

With self-sealing coupling, installed between flow and return line thermometer ball valve, adjustment range 1-6 m water column / 1.5 - 8.5 psi.

[Item # 2854] 

Warning: No images in specified directory. Please check the directoy!

Debug: specified directory - http://www.solarnetix.com/images/Hydronics/Accessories/DN25/Pressby

Consisting of 2 insertion pieces, for connecting pipes with 1“ male under modular heating circuits or for the connections mentioned on the right.

[Item # 3431 NA] 

Warning: No images in specified directory. Please check the directoy!

Debug: specified directory - http://www.solarnetix.com/images/Hydronics/Accessories/DN25/ConnsetF

Using the wall bracket and mounting plate centre distances from 87.5 mm up to 162.5 mm (with 12.5 mm distance) off the wall are possible.

[Item # 3422SET] 

Warning: No images in specified directory. Please check the directoy!

Debug: specified directory - http://www.solarnetix.com/images/Hydronics/Accessories/DN25/WB3422SET

For installing a modular heating circuit under a distribution manifold.

Please note: when using wall brackets an additional mounting plate for the assembly of a 2-fold MV2 modular distribution manifold is necessary (Item # 3425).

[Item # 34241] 

Warning: No images in specified directory. Please check the directoy!

Debug: specified directory - http://www.solarnetix.com/images/Hydronics/Accessories/DN25/Coupling4Flow

For installation under a modular distribution manifold and for attaching wall brackets.

[Item # 3425] 

Warning: No images in specified directory. Please check the directoy!

Debug: specified directory - http://www.solarnetix.com/images/Hydronics/Accessories/DN25/Mountplate

  •  Start 
  •  Prev 
  •  1  2 
  •  Next 
  •  End 

Page 1 of 2

Go to top