K31 (3/4"-DN20) High Temperature Zone Module (Residential)
For High Temperature Zone or Boiler Primary Loop.
Hydronic Heating Modules
K32(3/4"-DN20) Low-Temperature Zone Module with 3-way Mix Valve
For Heating Zones Controlled by Motorized Mixing with Reset Control.
K33 (3/4"-DN20) Low Temperature Zone Module (Residential)
For Low Temperature Heating Zones Controlled by 3-Way Thermostatic Mixing.
K34 (3/4"-DN20) Low-Temperature Zone Module (Residential)
With 3-Way Mixing Valve with Bypass 0-50% for High Flow Heating Zones Controlled by Motorized Mixing with Reset Control.
Modular Distribution Manifold DN20
For use in a closed loop design. The modular design of distribution Manifolds allow parallel connection of multiple Zone Modules in order to customize any installation.
Available in 2-6 sectional designs, for connection of 2 to 9 heating zones.
MW Hydraulic Separator for Modular Systems -3/4"
For use in a closed loop design. Flow up to 2200 L/h (9.7 USgpm).
In conjunction with boilers having high resistance (condensing) or when total flow rate of all parallel running circulators is higher than maximum flow rate of the boiler, the low-loss header provides hydraulic separation, decoupling boiler and system circuits from each other.
default MW HS-Product Specification (300 KB)
default MW HS - Installation & User Manual (456 KB)
It is recommended to use the low-loss header in applications in which the total system flow rate exceeds the maximum boiler flow rate. PAW strongly recommends the use of a hydraulic separator in cases where the system head and flow rates are unknown.